Gauge wheel bearing
              
             The gauge wheel is an effective depth control method on the                
           precision hole drilling machine. It is essential for both the fertilizing
           disc and the opener. The gauge wheel maintains the pressure on the
           soil through hydraulic or spring system during work. When cutting
           the soil, the gauge wheel presses the side wall so that the opener disc
           does not lift or tear the soil as it rotates from the soil, which helps to
           accurately place the seed because the seed is guided along the side
           wall to The bottom of the groove, so the stability of the gauge wheel
           bearing is particularly important.
            

     Nowadays, precision seeder pushes the speed of seeding to the
    extreme, so various overload protection measures are applied to
    the seeder. The traditional gauge wheel bearing is suitable for
    low speed seeding, and can not adapt to the impact of high speed
    seeding, which causes the bearing failure. CSELITE copes with
    high speed impact by optimizing the contact angle of bearings
    and increasing the load of bearings. It abandons the traditional
    bearing-axle connection and combines the connecting shaft and
    the inner ring of bearings. This greatly improves the overall rigidity
    of the components and reduces the cost of later maintenance.

      
      Resistance to dust and mud

     As an important component of the seeder, the gauge wheel is always
       subjected to harsh working environment, such as ubiquitous dust,
       mud and sand impact. Therefore, we have adopted R-type seal and
       R-type static seal specially used for dust and sand at both ends of the
       bearing to ensure the stability and reliability of the sealing system. 

    Suitable for all kinds of gauge wheels

    In order to adapt to different soils and working environments, the
    types of gauge wheels. For example, the gauge wheels of different
    widths have different degrees of soil compaction; the gauge wheels
    with spokes allow the soil to pass through the gauge wheel under
    humid conditions. Reduces soil and debris between the opener and
    the depth stop. To this end, CSELITE offers a variety of bearings to
    suit different requirements.